How about disposable vape of China

Technology l Does the electronic cigarette have a sticky or burnt smell?
How many of these 21 pits have you stepped on…

After more than 10 years of development of electronic cigarettes, everyone has gradually established a certain understanding of the taste. The problem of sticky/burnt/peculiar smell is more and more concerned by customers or consumers. Based on the above needs, I will share with you below. , The problem of paste/burnt/peculiar smell is generally caused by the following reasons:

 

  • 1: The output voltage of the battery rod/microphone is too high, and the heating wire and oil-absorbing cotton are scorched when the oil guide is not smooth;

 

  • 2: The discharge rate of the battery is too high, and the heating wire and oil-absorbing cotton are scorched when the oil guide is not smooth;

 

  • 3: The standing time after oil injection is not enough, the e-liquid is not fully transferred to the heating wire and the oil-absorbing cotton, and the heating wire and the oil-absorbing cotton are scorched by suction;

 

  • 4: The oil and electricity do not match. In the later stage of smoking, the e-liquid will dry up first, the battery still has electricity, and the heating wire and oil-absorbing cotton are scorched;
 
 
  • 5: The viscosity of e-liquid is high and the fluidity is not good, which causes the oil-absorbing cotton to not guide the oil smoothly, and the heating wire and the oil-absorbing cotton are scorched by suction;


  • 6: The density of the oil-absorbing cotton is high or it is not fluffy enough, which causes the oil-absorbing cotton to not guide the oil smoothly, and the heating wire and the oil-absorbing cotton are scorched by suction;


  • 7: The diameter of the oil inlet holes is small or the number is small, which causes the oil-absorbing cotton to not guide the oil smoothly, and the suction will burn the heating wire and the oil-absorbing cotton;

 

  • 8: The sugar/sweetener content of e-liquid is high, which causes carbon deposition on the oil-absorbing cotton, resulting in a sticky smell;


  • 9: The design of the oil inlet hole is too high. When the oil volume in the oil cup is less than 1/3, the oil-absorbing cotton cannot absorb the e-liquid, and the heating wire and the oil-absorbing cotton are scorched by suction;


  • 10: The design of the interference between the oil inlet hole and the oil-absorbing cotton is unreasonable, which causes the oil-absorbing cotton to not guide the oil smoothly, and the heating wire and the oil-absorbing cotton are scorched by suction;

 

  • 11: Improper storage of e-liquid or expired shelf life, causing taste variation;

 

 
  • 12: Accidental mixing of two or more e-liquids for various reasons, resulting in taste variation;

 

 

  • 13: There is no wake up before oil injection, which causes the layering of the smoke oil, resulting in a big difference in taste;
 
 
  • 14: The structure of the atomizer is designed to use glue, and the heating device will evaporate the glue, causing the glue to smell;

 

  • 15: The surface of the insulating ring/silicone sleeve/sealing ring has oil stains such as a mold release machine, which may cause taste variation due to contact with e-liquid;

 

  • 16: The iron-chromium-aluminum heating wire has a chemical reaction with the e-liquid, causing the suction to have a rust smell;

 

  • 17: The plastic/silicone/glass fiber tube is too close to the heating wire, and the heating wire will be scorched when it is working, causing peculiar smell;

 

  • 18: Structural design defects, the condensate flows back into the oil-absorbing cotton, causing suction odor;

 

  • 19: The airway is not smooth, and the condensate accumulates less and more, gathers around the heating wire, and frys oil during suction, causing hot mouth and peculiar smell;

 

  • 20: The density of the oil storage cotton is high, which locks some components in the e-juice, and fails to fully release and exert the original formula of the e-juice, resulting in peculiar smell;

 

  • 21: Improper process arrangement or operation. Before oil filling, the PCBA or microphone head is activated to start the work to burn the heating wire and oil-absorbing cotton;
What's your reaction?
0Awesome0Haha0Wow0Hate0Sad0Fail
Subtitle
About AAAVAPE

Some description text for this item

AAAVape or say Triple-A vape was started its vape journey 10 years ago, which is the combination of Core R&D development and service spirits.

Unlike most vape company focused on brand marketing, AAAVape pays more attention to coil technology. About Five years ago, The Leader of AAAvape started the tough work for high-density organic cotton material, after thousands of failure AAAVape acquired its own Ccoil Technology.

Subtitle
Connect With Us

Some description text for this item

AAAVAPE.© 2023 All rights reserved.